๐ฅ๏ธDead Pixel & Screen Uniformity Tester Documentation & Guide
๐How to Test Your Screen for Pixel Defects
- Clean Screen Gently First: Wipe away dust specks so dust isn't mistaken for a dead pixel.
- Launch Fullscreen Pattern: Select a color pattern (Red, Green, Blue, White, Black, or 50% Gray) and click Launch Test Screen.
- Click Surface to Cycle All Colors: Click anywhere on the color canvas to step sequentially across RGB/W/K/Gray, pressing Esc when done.
โ๏ธSub-Pixel Red/Green/Blue Isolation Methodโผ
Modern LCD/OLED panels build every pixel from independent Red, Green, and Blue sub-pixels. Displaying pure `#FF0000`, `#00FF00`, and `#0000FF` isolates single defective sub-pixels immediately, while `#808080` 50% gray exposes OLED uniformity banding.
๐Formula & Mathematical Architectureโผ
๐งฎConcrete Worked Examplesโผ
Cycle to Pure Black (#000000) & Pure Red (#FF0000)Bright green pinprick dot stands out immediately against blackA stuck green transistor stays lit even when Red=0, Green=0, Blue=0.
Select 50% Uniformity Gray (#808080) in dim roomReveals subtle vertical banding or tint unevenness50% dark-gray brightness stresses OLED low-voltage panel uniformity most.
โ ๏ธCommon Pitfalls & Edge Casesโผ
- โ ๏ธTesting a dusty display and panicking over lint particles (always wipe softly with a microfiber cloth first!).
- โ ๏ธInspecting backlight bleed under bright overhead sunlight instead of a dimly lit room.
- โ ๏ธAssuming fullscreen fails inside embedded iframes โ click the panel directly or press F11 if browser blocks automatic fullscreen.
๐กHardware QA & Return-Window Checksโผ
- Inspecting brand-new monitors, laptops, or Android test phones within retail return windows.
- Checking second-hand IPS panels in dark rooms for severe corner backlight bleed on pure black.